PRO        Can be programmed for selective zones         Adjustable from 20%-100% of capacity           No water discharge        Commercial pump with high reliability         Draw from any chemical container

The Fertipump Pro is an excellent alternative to the Fertigator M1 (440 ounces per hr. max) because you can turn it on or off by zone and the flow rate is adjustable.(4-40, 8-80, 12-128 oz/hr)  It is usually not necessary to change the amount of fertilizer for each zone as plants consume water and fertilizer proportionate to the amount of sunlight energy.   It can be mounted next to your controller or outside near your injection point.  It is available in 3 sizes suitable for nearly any system.  It has only 1 connection to your main line to feed the fertilizer into your main.  Included is an injection quill (a kit that includes a check valve, a 1/4" fitting with an extension that you thread into your main).  There is no discharge of water from this unit as there is with a Fertigator.  The 3 foot suction line is included and has a suction basket (filter) and check valve.  The suction line can be from any container, such as the jug the fertilizer comes in or one of the large tanks shown below.  This is a quiet running diaphragm pump that is adjustable down to 10% of the maximum capacity.  A dial and leaver assist you in setting the desired output.  Select a pump size that will normally run at 50% capacity as that will give you capacity for heavier injection cycles and still allow you to reduce the output by half.  This unit comes with a pump start relay that attaches to your irrigation clock's master valve station.  If your controller will allow you to select the master valve on/off by station, you select which zones to treat   If this feature is not available with your system, add the zone selector below and you will be able to run the chemical on any of the zones you assign it to.  For outdoor mounting this pump will fit in the water resistant   Nema 4  enclosure shown below.

For assistance is selecting the proper pump size see the calculation

	FertiPump Pro 40 oz. per hr	List $499 Spring sale price \     $449.99
	FertiPump Pro 80 ounces per hr	List $499 Spring sale price      $449.99
	FertiPump Pro 128 ounces per hr	List $499 Spring sale price      $449
	FertiPump Pro Larger sizes available, call for quotation
	FertiPump  Nema 4 Enclosure upgrade	$129.99
	ZONE SELECTOR Use if you do not want all zones to be treated.  Connect one of 8 leads to any zone to run system on that zone.  Add 1 unit for each 8 valves to run.	$39.99
	25 GALLON STORAGE TANK  ALMOND 14" SQUARE BY 34" TALL	$59.99
	25 GALLON STORAGE TANK  BLACK 14" SQUARE BY 34" TALL	$59.99
1 inch	If you are attaching to 1 inch poly pipe use 1 of these fittings and you do not need to cut your main line.  In special instructions specify if you need 3/4", or 1 1/4" in place of the 1" fitting	$4.00

REVIEW CART

No two irrigations systems are alike.  Sizes, locations, and turf types all have unique needs.  We strongly urge you to do some research before you install an irrigation system.  Even if you already have one, it is helpful to review your system compared to what is considered standard practice.  An easy to understand tutorial is available at

http://www.irrigationtutorials.com/reviews/index.htm

The average lawn will need about 10 oz. of our liquid fertilizer per 1000 sq. ft. each week.  In areas where the irrigation system is the principal source of water, the 10 oz is spread over all the watering cycles per week.  If you do not run your sprinkler system all week due to rain, you should run the fertilizer system at 20 oz. per 1000 sq. ft.. the following week to make up for the week of no application.