PHOSGARD 0-28-25 is a nutritional supplement
for a variety of crops. When applied properly it
may be beneficial to plant growth, crop yield, and
quality. Phosgard 0-28-25 can be used as soil
and/or foliar applications. It can also be applied
through irrigation water.
STATEMENT OF PRODUCT
When applied as a soil application to annual
crops, a lesser response from the initial crop,
with a corresponding superior response from
succeeding crops, may be observed. In addition,
placement close to seeds or root zones may be
injurious to crops. The effect may be aggravated
by a soil pH below 6.5.
GENERAL RECOMMENDATIONS
SOIL APPLICATION: Phosgard 0-28-25 can be
applied to soil through various types of irrigation
systems. The application rate is 64 to 80 oz. per
acre (5-6 liters/hectare).
FOLIAR APPLICATION: Phosgard 0-28-25 can
be applied by air. Add recommended amount
to 10 gallons of water. In concentrate or dilute
ground spryaers, it should be diluted with at least
100 times of water.
Almonds, Avocado, Citrus, Grapes, Hops,
Kiwi, Olives, Pistachios, Walnuts and Other
Nut Crops: Apply 32-64 oz. per acre (3-5 liters/
hectare) pre-bloom with subsequent applications
at 30 to 90 day intervals or as needed.
Apples, Papaya, Pears and Other Pome
Fruits: Apply 32-64 oz. per acre (3-5 liters/hectare) pre-bloom with subsequent applications at
30 to 90 day intervals or as needed.
Apricots, Peaches and Other Stone Fruits:
Apply 32-64 oz. per acre (3-5 liters/hectare)
pre-bloom with subsequent applications at 30
to 90 day intervals or as needed.
Beans and Peas: Apply 32-64 oz. per acre
(3-5 liters/hectare) at bud stage prior to bloom.
Repeat the applications 1 to 2 times with an
interval of 10 to 15 days or as needed.
GUARANTEED ANALYSIS
Available Phosphoric Acid (P2O5)
(AOAC Method 960.02)..................28.0%
Soluble Potash (K2O) ....................25.0%
Derived from Phosphorous acid and
potassium hydroxide.
Lot #:
U.S. Pat. # 6,168,643 and # 5,707,418
CAUTION:
Do not apply together withcopper containing products.
Avoid the application of copper containing products 20 days
prior to the application of Phosgard and for 10 days after
the application of Phosgard.
PREVENT and CORRECT
NUTRIENT DEFICIENCIES
KEEP OUT OF REACH
OF CHILDREN
Manufactured by:
JH Biotech, Inc.
P.O. Box 3538
Ventura, California 93006 USA
Weight per gallon: 12.2 lbs. (5.5 kg)
Net Contents:
1 Pint (0.47 liter)
2.5 Gallons (9.45 liters)
2 x 2.5 Gallons (18.93 liters)
5 Gallons (18.93 liters)
55 Gallons (207.9 liters)
Beets, Carrots, Cole Crops, Garlic, Lettuce,
Onions and Spinach: Apply 64-96 oz. per acre
(5-7 liters/hectare) when plants are well established. Repeat the application 1 to 2 times with
an interval of 10 to 15 days or as needed.
Cucumbers, Melons Peppers, Strawberries
and Tomatoes: Apply 32-64 oz. per acre (3-5
liters/hectare) when plants are well established.
Repeat the application 1 to 2 times with an interval of 15 to 20 days or as needed.
Pineapple: Dip/Drench Applications: Dilute 64
oz. per 100 gallons (500 ml/100L) of solution.
Apply at planting. Foliar Spray: Dilute 64 to 96
oz. per 100 gallons (500-750 ml/100L) of spray
solution. Spray until wet. Apply at 3 month intervals or as needed.
Potato, Sweet Potato: Apply 32-64 oz. per acre
(3-5 liters/ hectare) when plants are 4-6 inches
in height. Repeat the application 1 to 3 times
with an interval of 10 to 15 days or as needed.
Blackberries and Raspberries: Apply 32-64
oz. per acre (3-5 liters/hectare) pre-bloom with
subsequent applications at 30 to 90 day intervals
or as needed.
Commercial Nursery and
Ornamental Crops and Turf:
Apply 24-48 oz. per acre (2 to 4 liters/hectare)
after potting or transplanting. Repeat the application every 30-40 days or as needed. For small
areas, dilute 2-3 oz. of Phosgard in 1 gallon of
water and apply to plants 1-2 weeks after potting
or transplanting. Repeat the application every
30-40 days or as needed.
For Turf apply 3-6 fl. oz. per 1,000 sq. ft. in 4-10
gallons of water. Apply as needed.
LIMITED WARRANTY
Manufacturer or seller makes no warranty, whether expressed or implied,
concerning the use of this product other than for the purposes indicated
on the label. Neither manufacturer nor seller shall be liable for any injury
or damage caused by this product due to misuse, mishandling, or any
application not specifically described on the label.
Information regarding the contents and levels of metals in this product is
available by calling 1-800-428-3493
0623-D-A-1